AMTEKLTD

WIN1220HS
CNC Beam Processing Center WIN1220HS

WIN1220HS is the most advanced beam drilling & marking system made by TENWIN Automation. The machine has 11 CNC axes of motion for feeding, drilling, marking, and tool changing. The three drilling units can drill both flanges and web simultaneously even if the holes are not inline. The machine is equipped with a hydraulic driven linear tool changer with 4 or 6 tools for each drilling spindle, which can automatically change the tools when drilling different diameter holes. The feedng system can be configured with customer's requirements to be either double-roller feeding or CNC carriage feeding.

The drilling spindles are all equipped with carbide drills (rotation speed: 180 ~ 1500 rpm) to ensure higher productivity than drilling with H.S.S. drills. An AC servo motor powers the feeding with dynamic speed control enabling the best drilling condition. External mist cooling and inner cooling through the drill bit are both availalbe on the machine.

CNC marking unit resides on the unloading roller to mark pre-programmed numbers/characters on the flange of the beam. The marking depth is 1.5mm, which is clear enough after surface treatment such as shot blasting, HD Galvanizing, etc..

The control system consists of industry PC with PLC and control modules. Individual control console and electrical cabinet are fixed beside the main machine. Remote diagnosis and Ethernet connection is also available.


Profile Specification

Web Height
Min 150 mm
Max 1220mm

Flange Width
Min 75mm
Max 600mm

Thickness
Min 6mm
Max 70mm

Total Weight
Max 10000kg

Linear Weight
Max 1000 kg/m

Drilling Capacity
Vertical Drilling Heads
No. 1

Horizontal Drilling Heads
No. 2

Max. Hole Dia. 40mm
Max. Thickness 75mm

Marking Unit Specification
Characters
No.
36 (A~Z, 0~9)
Size of Characters
mm
14 x 10 x 20
Marking Type

Turret
Marking Speed
No./min
40